advertisement

Powered by Blogger.

Search This Blog

Samsung J7-SM-J700H Baseband Unknown Network Repair Done 100% ok

Samsung J7-SM-J700H Baseband Unknown Network Repair Done By ODIN Samsung Flash Tools 100% Tested.

Tutorial : How to Use Odin Flash Tools

Step 1: Download the Modified firmware zip package for SM-J700H. Then extract the downloaded zip file. After extracting, you will either get one **.tar  file or will get Single File.

    If you get one file, it will have everything inside it: PDA

Step 2: Download Odin3_v3.07.zip and extract the downloaded zip file.

Step 3: Open or Right click on Odin3 v3.07.exe and run it as administrator to start Odin.

Step 4: Go to download mode. For most Samsung devices, you will need to do this:

    Switch your device off.
    Press & hold Power + Home + Volume down buttons till you see a triangle and Android robot.
    Now press the Volume up button to confirm entering the download mode.

Step 5: Once it is in download mode, connect your device to the computer via USB cable.

When your device is connected, one of Odin ID:COM boxes will turn yellow and display the COM port number. See the screenshot below:


   Note : If you do not see the port number in any of ID:COM boxes or if the box does not turn yellow, please do not proceed and check if the USB drivers are installed correctly and the device is connected via USB. If you do see the message, it means that your device was detected successfully by Odin and you can now flash any firmware files onto your device using Odin.

Recommended Reading: More information about Odin buttons & checkboxes >>

Step 6: If the firmware zip package had just one file, click on PDA button, then browse and select the firmware file (.tar).

Step 7: Make sure that you do not mess up with checkboxes:

    Auto Reboot and F. Reset Time checkboxes should be selected
    All other checkboxes should be unchecked.

Step 8: After selecting the appropriate files, click on “Start” button in Odin.

This will kick off the process to flash the ROM. Please do not disconnect your device during the process.

Step 9: Once flashing is complete, your device will reboot. You can now disconnect from the PC and start using it.

That’s it. You can use these steps to flash ROM on your Android device using Odin.



 

Oppo A37F Network Unlock Done 10000% tested ok


All Oppo Sim unlock Done, Oppo A37F, f1s, a33f and other oppo unlock Done
All Oppo Country unlock Done, Oppo A37F, f1s, a33f and other oppo unlock Done
All Oppo Carrier unlock Done, Oppo A37F, f1s, a33f and other oppo unlock Done
All Oppo Provider unlock Done, Oppo A37F, f1s, a33f and other oppo unlock Done
 



Unlock 1000% Done Tested - Call : +8801711965082

Micromax Q351 Factory Flash File/ Official Firmware Pac File Download 100% Tested ok

Micromax Q351 Factory Flash File/ Official Pac File Download 100% Tested ok
Micromax Q351 firmware  v6.0 download here
Micromax Q351 official firmware here
Micromax Q351 update firmware flash file
Micromax Q351 stock firmware download now



Q351_Q351_6.0_MMX_Q351_BD_SW_V1.4_HW_V1.02_29082016_Micromax_Q351.rar

Why you Update :

The latest Micromax Q351 flash files has been released free downloading Direst Links for Flash. In any case Micromax Q351 mobile fault stage if slow working. Software break, File missing with the reason of its outdated Firmware or corrupted firmware. You can use latest flash files for flashing or firmware updating. This Mobile for Flashing you can use different tools, boxes or Different Method. If you always slove your mobile phone  you will flash with its latest flash files for restore with original settings. So before flashing you will backup of your important data like messages, contacts and images. After Flash successfully completed then restore  backup data. You can update your mobile always latest firmware in any time. For Updating or Flashing you can use any tools or box via USB data cable. See Below the latest Firmware.


Q351_Q351_6.0_MMX_Q351_BD_SW_V1.4_HW_V1.02_29082016_Micromax_Q351.rar

Samsung Tool PRO 27.4 Latest Update. Patch cert new FW G930x/G935x, Reset FRP in flash mode.

Samsung Tool PRO 27.4 Update. Patch cert new FW G930x/G935x, Reset FRP in flash mode. 

Some hot solution again added and some fix, we hope all z3x pro users will be happy.

Added:
- support patch CERT on new FW G930x/G935x

- support SM-G600F (Unlock(root) Direct (not root) Read codes (world first), Direct (no root) Read Cert (world first), Write CERT, Repair IMEI, Patch CERT (repair network) - (world first))
- support SM-G610L (Unlock(root) Direct (not root) Read codes (world first), Direct (no root) Read Cert (world first), Write CERT, Repair IMEI, Patch CERT (repair network) - (world first))
- support SM-G610S (Unlock(root) Direct (not root) Read codes (world first), Direct (no root) Read Cert (world first), Write CERT, Repair IMEI, Patch CERT (repair network) - (world first))

Download

- Addition support SM-A9000 (New method reset FRP in flash mode)
- Addition support SM-A9100 (New method reset FRP in flash mode)
- Addition support SM-A910F (New method reset FRP in flash mode)
- Addition support SM-С5000 (New method reset FRP in flash mode)
- Addition support SM-С7000 (New method reset FRP in flash mode)
- Addition support SM-G360T (New method reset FRP in flash mode)
- Addition support SM-G360T1 (New method reset FRP in flash mode)
- Addition support SM-G530P (New method reset FRP in flash mode)
- Addition support SM-G530T (New method reset FRP in flash mode)
- Addition support SM-G530W (New method reset FRP in flash mode)
- Addition support SM-G5500 (New method reset FRP in flash mode)
- Addition support SM-G550F (New method reset FRP in flash mode)
- Addition support SM-G550FY (New method reset FRP in flash mode)
- Addition support SM-G550T (New method reset FRP in flash mode)
- Addition support SM-G550T1 (New method reset FRP in flash mode)
- Addition support SM-G550T2 (New method reset FRP in flash mode)
- Addition support SM-G9200 (New method reset FRP in flash mode)
- Addition support SM-G9208 (New method reset FRP in flash mode)
- Addition support SM-G9209 (New method reset FRP in flash mode)
- Addition support SM-G920A (New method reset FRP in flash mode)
- Addition support SM-G920AZ (New method reset FRP in flash mode)
- Addition support SM-G920D (New method reset FRP in flash mode)
- Addition support SM-G920F (New method reset FRP in flash mode)
- Addition support SM-G920FD (New method reset FRP in flash mode)
- Addition support SM-G920FQ (New method reset FRP in flash mode)
- Addition support SM-G920I (New method reset FRP in flash mode)
- Addition support SM-G920K (New method reset FRP in flash mode)
- Addition support SM-G920L (New method reset FRP in flash mode)
- Addition support SM-G920R4 (New method reset FRP in flash mode)
- Addition support SM-G920P (New method reset FRP in flash mode)
- Addition support SM-G920S (New method reset FRP in flash mode)
- Addition support SM-G920T (New method reset FRP in flash mode)
- Addition support SM-G920T1 (New method reset FRP in flash mode)
- Addition support SM-G920V (New method reset FRP in flash mode)
- Addition support SM-G920W8 (New method reset FRP in flash mode)
- Addition support SM-G9250 (New method reset FRP in flash mode)
- Addition support SM-G925A (New method reset FRP in flash mode)
- Addition support SM-G925D (New method reset FRP in flash mode)
- Addition support SM-G925F (New method reset FRP in flash mode)
- Addition support SM-G925FQ (New method reset FRP in flash mode)
- Addition support SM-G925I (New method reset FRP in flash mode)
- Addition support SM-G925J (New method reset FRP in flash mode)
- Addition support SM-G925K (New method reset FRP in flash mode)
- Addition support SM-G925L (New method reset FRP in flash mode)
- Addition support SM-G925P (New method reset FRP in flash mode)
- Addition support SM-G925R4 (New method reset FRP in flash mode)
- Addition support SM-G925S (New method reset FRP in flash mode)
- Addition support SM-G925T (New method reset FRP in flash mode)
- Addition support SM-G925V (New method reset FRP in flash mode)
- Addition support SM-G925W8 (New method reset FRP in flash mode)
- Addition support SM-G925Z (New method reset FRP in flash mode)
- Addition support SM-G9280 (New method reset FRP in flash mode)
- Addition support SM-G9287 (New method reset FRP in flash mode)
- Addition support SM-G9287C (New method reset FRP in flash mode)
- Addition support SM-G928A (New method reset FRP in flash mode)
- Addition support SM-G928C (New method reset FRP in flash mode)
- Addition support SM-G928F (New method reset FRP in flash mode)
- Addition support SM-G928G (New method reset FRP in flash mode)
- Addition support SM-G928I (New method reset FRP in flash mode)
- Addition support SM-G928K (New method reset FRP in flash mode)
- Addition support SM-G928L (New method reset FRP in flash mode)
- Addition support SM-G928N0 (New method reset FRP in flash mode)
- Addition support SM-G928P (New method reset FRP in flash mode)
- Addition support SM-G928S (New method reset FRP in flash mode)
- Addition support SM-G928T (New method reset FRP in flash mode)
- Addition support SM-G928W8 (New method reset FRP in flash mode)
- Addition support SM-J320N0 (New method reset FRP in flash mode)
- Addition support SM-J320P (New method reset FRP in flash mode)
- Addition support SM-J320R4 (New method reset FRP in flash mode)
- Addition support SM-J320Y (New method reset FRP in flash mode)
- Addition support SM-J320YZ (New method reset FRP in flash mode)
- Addition support SM-J320ZN (New method reset FRP in flash mode)
- Addition support SM-J5007 (New method reset FRP in flash mode)
- Addition support SM-J500F (New method reset FRP in flash mode)
- Addition support SM-J500FN (New method reset FRP in flash mode)
- Addition support SM-J500G (New method reset FRP in flash mode)
- Addition support SM-J500H (New method reset FRP in flash mode)
- Addition support SM-J500M (New method reset FRP in flash mode)
- Addition support SM-J500N0 (New method reset FRP in flash mode)
- Addition support SM-J500Y (New method reset FRP in flash mode)
- Addition support SM-J510F (New method reset FRP in flash mode)
- Addition support SM-J510FN (New method reset FRP in flash mode)
- Addition support SM-J510GN (New method reset FRP in flash mode)
- Addition support SM-J510H (New method reset FRP in flash mode)
- Addition support SM-J510K (New method reset FRP in flash mode)
- Addition support SM-J510L (New method reset FRP in flash mode)
- Addition support SM-J510MN (New method reset FRP in flash mode)
- Addition support SM-J510S (New method reset FRP in flash mode)
- Addition support SM-J510UN (New method reset FRP in flash mode)
- Addition support SM-J7109 (New method reset FRP in flash mode)
- Addition support SM-P350 (New method reset FRP in flash mode)
- Addition support SM-P355 (New method reset FRP in flash mode)
- Addition support SM-P355M (New method reset FRP in flash mode)
- Addition support SM-P550 (New method reset FRP in flash mode)
- Addition support SM-P555 (New method reset FRP in flash mode)
- Addition support SM-P555C (New method reset FRP in flash mode)
- Addition support SM-P555K (New method reset FRP in flash mode)
- Addition support SM-P555L (New method reset FRP in flash mode)
- Addition support SM-P555M (New method reset FRP in flash mode)
- Addition support SM-P555S (New method reset FRP in flash mode)
- Addition support SM-P555Y (New method reset FRP in flash mode)
- Addition support SM-T355 (New method reset FRP in flash mode)
- Addition support SM-T355C (New method reset FRP in flash mode)
- Addition support SM-T355Y (New method reset FRP in flash mode)
- Addition support SM-T357W (New method reset FRP in flash mode)
- Addition support SM-T536 (New method reset FRP in flash mode)
- Addition support SM-T550 (New method reset FRP in flash mode)
- Addition support SM-T555 (New method reset FRP in flash mode)
- Addition support SM-T555C (New method reset FRP in flash mode)
- Addition support SM-T713 (New method reset FRP in flash mode)
- Addition support SM-T719 (New method reset FRP in flash mode)
- Addition support SM-T719C (New method reset FRP in flash mode)
- Addition support SM-T719Y (New method reset FRP in flash mode)
- Addition support SM-T813 (New method reset FRP in flash mode)
- Addition support SM-T819 (New method reset FRP in flash mode)
- Addition support SM-T819C (New method reset FRP in flash mode)
- Addition support SM-T819Y (New method reset FRP in flash mode)


Fixed:
- J120W read codes/cert
- Read codes/CERT/unlock on Shannon305 (G570F...)
- check CERT on Shannon315 (J710F ..)
- "Install now" function ("update available" window)

Download

Infinity Chinese Miracle-2 SPD/Spreadtrum v1.24 - SC7731c and more Latest update




Infinity Chinese Miracle-2 SPD/Spreadtrum v1.24 - SC7731c and more features

SPD SP Platform

- Main
Improved booting
Fixed latest SPD drivers support
Flash engine updated
SC7731c support revised. Wide range of devices supported now.

- PAC creator improved
New types supported

- Service operations improved
HWInfo tool improved : supported new types
FRP reset improved : supported new types
NVM operations improved
Repair Security over flash mode improved
> Info : Some Android 6 devices can clear userdata after repair!

- Other
Some improvements and bugfixes at all


Download link #1

Download link #2

Download link #3

Huawei Y625-U32 Flash File / Firmware Flash File Latest Version Free Download V100R001C567B108

Huawei Ascend Y625-U32 Firmware Flash File V100R001C328B105_Android 4.1 Free Download
Huawei Ascend Y625-U32 Flash File Latest V100R001C328B105_Android 4.1 Free Download
Huawei Ascend Y625-U32 Latest V100R001C328B105_Android 4.1 Firmware File Free Download
Huawei Ascend Y625-U32 Factory Flash File V100R001C328B105_Android 4.1_Free Download
Huawei Ascend Y625-U32 Latest File V100R001C328B105_Android 4.1_Flash Rom Free Download
Huawei Ascend Y625-U32 Stock Rom File V100R001C328B105_Android 4.1_Free Download

Or
Huawei Ascend Y625-U32 Firmware Flash File V100R001C567B108_Android 4.1 Free Download
Huawei Ascend Y625-U32 Flash File Latest V100R001C567B108_Android 4.1 Free Download
Huawei Ascend Y625-U32 Latest V100R001C567B108_Android 4.1 Firmware File Free Download
Huawei Ascend Y625-U32 Factory Flash File V100R001C567B108_Android 4.1_Free Download
Huawei Ascend Y625-U32 Latest File V100R001C567B108_Android 4.1_Flash Rom Free Download
Huawei Ascend Y625-U32 Stock Rom File V100R001C567B108_Android 4.1_Free Download


Why you Update :

The latest Huawei Ascend Y625-U32 flash files has been released free downloading Direst Links for Flash. In any case Huawei Acsend Y625-U32 mobile fault stage if slow working. Software break, File missing with the reason of its outdated Firmware or corrupted firmware. You can use latest flash files for flashing or firmware updating. This Mobile for Flashing you can use different tools, boxes or Different Method. If you always slove your mobile phone  you will flash with its latest flash files for restore with original settings. So before flashing you will backup of your important data like messages, contacts and images. After Flash successfully completed then restore  backup data. You can update your mobile always latest firmware in any time. For Updating or Flashing you can use any tools or box via USB data cable or OTA Flash File Method by SD Card. See Below the latest Firmware..

IF Scatter File then use Flash tools ROM Method - Video Tutorial

IF SD Card File mean dload File then use OTA Update Method - Video Tutorial

Huawei Ascend Y625-U32-V100R001C567B108  OR  V100R001C328B105



Download

V100R001C567B108
V100R001C328B105


How Flash Tools ROM Install :

** Unpack FlashTools, and Click on Flash tool.exe

** Select Scatter Loading then select MTXXXX_Android_scatter_emmc.txt in ROM

** Wait file to be added into Flash Tool Display

** Choose Option->USB Mode, Click USB Mode
   = Choose Option->DA Download All->Speed->High Speed, click High Speed

** Turn off your phone, Remove the battery.

** "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "

** and connect your phone into the computer via USB data cable.

** The process will start and a red progress bar will appear after color purple, yellow.

** And green circles display

** Finish !



How to OTA update :
1.Off course sure that Your  Device Battery is Charged about 70-80%.
2.Format SD Card (Optional).
3.Backup Your Important All Data.
Installation:
1.Extract zip Content and place the Folder on the root directory of SD Card
2.Power off the Device
3.Insert the SD card and Power on the Device by pressing VOLUME UP AND VOLUME DOWN keys simultaneously.
4.Wait for Installation Process to Complete (Do not turn off the Device during the installation process).


You can now safely open your phone or turn it on

Alcatel ONE TOUCH 6012D Firmware / Flash File / Stock Rom 100% tested ok

Alcatel ONE TOUCH 6012D Factory Firmware / Flash File / Stock Rom.

Alcatel idol mini One Touch Idol 6012d Many people are looking for stock ROM. Factory Rom or flash file

Why you Update :

The latest Alcatel ONE TOUCH 6012D flash files has been released free downloading Direct Links for Flash. In any case Alcatel ONE TOUCH 6012D mobile fault stage if slow working. Software break, File missing with the reason of its outdated Firmware or corrupted firmware. You can use latest flash files for flashing or firmware updating. This Mobile for Flashing you can use different tools, boxes or Different Method. If you always slove your mobile phone  you will flash with its latest flash files for restore with original settings. So before flashing you will backup of your important data like messages, contacts and images. After Flash successfully completed then restore  backup data. You can update your mobile always latest firmware in any time. For Updating or Flashing you can use any tools or box via USB data cable See Below the latest Firmware..
 
 Download

 How Flash Tools ROM Install :

** Unpack FlashTools, and Click on Flash tool.exe
** Select Scatter Loading then select MTXXXX_Android_scatter_emmc.txt in ROM
** Wait file to be added into Flash Tool Display
** Choose Option->USB Mode, Click USB Mode
= Choose Option->DA Download All->Speed->High Speed, click High Speed
** Turn off your phone, Remove the battery.
** "Press F9 (hit Download button)" OR " if upgrade ROM Firmware->Upgrade "
** and connect your phone into the computer via USB data cable.
** The process will start and a red progress bar will appear after color purple, yellow.
** And green circles display
** Finish !